Every roof is different.
Our inspection fits yours.
Pick your roof type to see what a licensed C-39 roofer checks, open the full checklist, or book an inspection with your roof type already filled in.
Residential Roof Inspection
A full top-to-bottom check of your home’s roof, flashing, gutters and attic.
View checklist
- Roof covering condition: cracked, slipped, curled or missing pieces
- Flashing at chimneys, skylights, walls, vents and valleys
- Ridge, hip and rake caps and their mortar or fasteners
Commercial Roof Inspection
Inspection of flat and low-slope roofs on offices, retail, apartments and light industrial buildings.
View checklist
- Membrane surface: blisters, cracks, punctures and exposed scrim
- Seams and laps on TPO, PVC, modified bitumen or built-up roofs
- Drains, scuppers and gutters for blockage and ponding water
Tile Roof Inspection
Clay and concrete tile roofs: broken tiles, slipped tiles and the underlayment beneath them.
View checklist
- Cracked, broken, slipped or missing clay or concrete tiles
- Ridge and hip tiles, mortar and bird stops
- Valley metal and debris buildup
Shingle Roof Inspection
Composition and asphalt shingle roofs: granule loss, wind damage, nail pops and flashing.
View checklist
- Granule loss and exposed mat
- Lifted, creased, curled or missing shingles
- Nail pops and exposed fasteners
Metal Roof Inspection
Standing seam and exposed-fastener metal roofs: fasteners, seams, sealants and corrosion.
View checklist
- Exposed fasteners and washers: loose, backed-out or missing
- Standing seams and panel laps
- Sealant at ridge caps, penetrations and trim
Flat Roof Inspection
Flat and low-slope roofs on homes and garages: ponding, seams, drains and coatings.
View checklist
- Ponding areas and drainage paths
- Seams, laps and membrane surface condition
- Drains, scuppers and downspouts
Slate Roof Inspection
Natural and synthetic slate: cracked or slipped slates, fasteners and copper flashing.
View checklist
- Cracked, delaminating, slipped or missing slates
- Nail and hook fasteners
- Copper or metal flashing at valleys, chimneys and walls
Wood Shake Roof Inspection
Wood shake and shingle roofs: splitting, rot, moss and fire-season risk.
View checklist
- Split, cupped, curled or missing shakes
- Rot and soft spots, especially on shaded slopes
- Fasteners and interlayment
Synthetic & Composite Roof Inspection
Synthetic slate and shake, stone-coated steel and composite products.
View checklist
- Panels or pieces that have shifted, cracked or faded
- Fastening pattern and exposed fasteners
- Flashing and trim details specific to the product
Pre-Purchase Roof Inspection
A roofer’s inspection before you buy or sell a home, with photos you can use in negotiation.
View checklist
- Overall roof condition and approximate remaining life
- Active leaks and past leak evidence in the attic
- Flashing, penetrations and previous repairs
Tell us about your property and we’ll recommend the right inspection.